|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Color: | Silver Hammer |
| Appearance: | Powder |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Powder coatings are mixed with a certain proportion of the resin, fillers, curing agents and other additives, and then prepared by hot extrusion, crushed and sieved. The products are stable at room temperature storage, and then baking heat melted and solidified to form a smooth and bright permanent coating to achieve the purpose of decoration and anti-corrosion.
| Product Details | |
| Type | Anti-Corrosion Big Rough Finish Silver Hammer Tone Powder Paint |
| Color | Silver Hammer |
| Surface Finish | Big Hammer Texture |
| Gloss level | 70%±5% |
| Particle Size | Average 32-42μm |
| Specific Gravity | 1.2-1.7g per cubic meter |
| Coverage | 7-9 square meters per Kg at 30-90 μm film thickness |
| Film thickness | 90-110um |
| Application Recommendation | |
| Application Voltage | 40-60 KV |
| Gun to Component Distance | 15-30CM |
| Curing Temperature | 200ºC X 10min |
| Powder coated Film Mechanical Properties | |
| Adhesion | Cross-cut(2mm), no loss of adhesion |
| Impact Resistance | Direct impact 30kg/cm |
| Pencil Hardness | 2H |
| Cupping Test | 6mm Mandrel |
| Bending Test | 5mm |
| Powder Coated Film Chemical Resistance | |
| Salt Spray Test | 5% NaCl Solution for 500 hours - No change |
| Acid Resistance | 5% HCl for 48 hours DIP test - No change |
| Alkali Resistance | 5% NaOH for 48 hours DIP test - No change |
| Storage Stability | |
| Store in ventilated, dry, clean room, temperature < 25ºC | |
| Relative humidity 50-65% | |
| Away from direct sunlight, fire, heat | |
| For best performance, use within 6 months | |
){kind=link}